Beauty Point

Live in Beauty Point and need an auto electrician? This small river town near the mouth of the Tamar has a working wharf, the Australian Maritime College campus and a lot of boats, so river damp and salt-tinged air are behind much of the work.

Sponsored

Be the auto electrician this area sees first

Reach drivers, tradies and fleet operators in this part of Launceston. See sponsor spots and prices.

How can we help?

Need it fixed?

Get a quote from a local Beauty Point auto electrician, for anything from a flat battery to a full fit-out.

Get a quote

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for Queensland conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Beauty Point?

Are you an auto electrical business? List your business on this site.

List your business on this site

Beauty Point at a glance

  • Area: West Tamar, West Tamar Council
  • Neighbours: Beaconsfield, York Town, Clarence Point, Kelso
  • Main roads: West Tamar Highway, Flinders Street, Wharf Road
  • Typical work: boat trailer lights, corroded battery terminals, marine and 12V accessory wiring, fuse and connector repairs, winch wiring, Anderson plugs

Common auto electrical jobs in Beauty Point

Beauty Point's work centres on the river: boat trailers that get wet every weekend, vehicles parked near the water, and the corrosion that follows.

Corrosion from the river air

Near the mouth of the Tamar, the air carries more salt and moisture than inland, and vehicles parked near the water feel it. Battery terminals, earth straps and connectors corrode faster, which shows up as slow starting, flickering lights or intermittent faults. Cleaning terminals and sealing exposed connections every so often keeps problems away. See how to clean corroded battery terminals.

Get it done: get a quoteDo it yourself: shop battery terminals

Boat trailer lights that keep failing

Backing a trailer into the river means the lights are dunked, and that is hard on even good wiring. Filament globes blow when hot glass meets cold water, and water creeps into old plugs and joins. Submersible LED lights, sealed connections and a trailer plug that is cleaned and dried after each launch make a big difference. Read why aren't my trailer lights working for fault-finding tips.

Get it done: get a quoteDo it yourself: shop submersible trailer lights

Anderson plugs and winch wiring

Electric boat winches and portable gear like fridges and battery boxes often run through Anderson plugs. These need heavy cable and good crimps to carry the current without heat build-up. A poorly crimped lug is a common cause of a winch that slows down halfway up the ramp. Our guide how to wire an Anderson plug shows how to do it properly.

Get it done: get a quoteDo it yourself: shop Anderson plugs

Fuses and connectors in damp conditions

Moisture gets into fuse boxes, connectors and switches over time, especially on older vehicles and trailers stored outdoors. Green corrosion inside a fuse holder can cause voltage drop or an accessory that works only when you wiggle it. Checking fuses and connectors is a quick first step, and a blown fuse that keeps blowing points to a short somewhere. How to check and replace a fuse explains what to look for.

Get it done: get a quoteDo it yourself: shop blade fuses

Batteries in holiday homes and seldom-used cars

Beauty Point has its share of holiday homes and part-time residents, and cars that sit for weeks between visits often greet their owners with a flat battery. A battery maintainer plugged in while you are away, or disconnecting the negative terminal, keeps it healthy. If you can't leave a charger connected, a solar trickle charger on the dash can help.

Get it done: get a quoteDo it yourself: shop battery maintainers

Beauty Point auto electrical questions

Should I disconnect my trailer plug before backing into the water?

Many boat owners do. Unplugging the trailer before launching stops cold water hitting hot globes and prevents current flowing through wet connections, which speeds up corrosion. Just remember to plug it back in before you pull out onto the road. Fitting submersible LED lights also helps.

Why do my battery terminals keep getting a white or green crust?

That crust is corrosion, often from battery gas and moisture reacting with the metal. Salty, damp air near the river makes it worse. Clean it off with a baking soda and water mix and a wire brush, rinse, dry, then apply terminal protector. If it keeps coming back quickly, have the battery and charging voltage checked.

Local tip for Beauty Point

After every launch at Beauty Point, give your trailer lights and plug a quick rinse with fresh water and let them dry before storing the trailer. Every few months, spray the plug pins with a moisture-displacing spray. It takes a minute and is the cheapest way to make trailer wiring last in a river town.

Auto electricians near Beauty Point

See the West Tamar listings for auto electricians and mobile services that cover Beauty Point.

Advertisement

Looking for parts in Beauty Point?

Need parts in Beauty Point? Quality parts from Ozautoelectrics are dispatched Australia-wide, so you can keep spares on hand for the boat trailer.

Search auto electrical parts

Searches the full range at Ozautoelectrics, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses

Nearby: Beaconsfield · York Town · Clarence Point · Kelso

Auto electricians in Beauty Point

Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

No auto electricians are based in Beauty Point itself yet. Businesses in the West Tamar area service Beauty Point.

Is your business missing? Tell us and we’ll add it free.

Run an auto electrical business in Beauty Point?